You'll have a blast with the toy set! Then add Extra Floors "One floor at a time" to design and build a huge skyscraper!
These are the Extra Floors below. Pick from Brick, Stone, or Glass and make your building one full
floor higher.
Build a skinny building and the "One Extra Floor" becomes almost two floors worth of construction parts.
Then change the timing plate and control the fall in a different direction. Like the pro's we use a delay sequence to control the buildings fall.
Advanced Engineering offers a Center Implosion Timing Plate included inside each toy set and two accessory plates sold separately,
the Side to Side Implosion and the Front Half Split Implosion.
Let's watch a Side to Side Implosion, shall we?
The Worlds First, Best, and ONLY engineering, construction, and demolition toy to be endorsed by the Pro's at Controlled Demolition Inc!
Design and build the structure your own way. No need to follow a basic square like shown,
You get 244 building pieces, enough parts to build a 4 story structure that is 16" inches square and over 15" inches tall.
Or design a different building and stretch the parts higher.
Choose between Red Brick, Gothic Stone or Black Glass exteriors in the toy set.
Add some Extra Floors and build this custom brick building or design your own.
Build it your own way and stretch the parts to over 5' feet tall! Remember the
Extra Floors allow to go taller and taller, up to 10 feet! Scroll down for much more...
Hey Mom...Advanced Engineering (AE) can be built by anyone. Ages 5 to 125 so none of us big kids feel left out.
AE is designed to teach hand-eye-coordination and small muscle control. AE can be constructed quickly for fast demolitions
or a perfect skyscaper can be built for playing with and admired.
Young engineers test their skills while building, locking the nubs on the floor panels into the hollow vertical columns.
The special locking nubs act like rivets and create a perfectly square structure.
When the building is completed and you wish to start over designing a new building...
Now comes the patented Demolition Process...
AE works by constructing the building on top of a patented base.
This base uses a special sliding plate, a rack-bar plunger box and an activator (bike) cable to start the demolition and knock the building down.
This process makes the toy buildings safe and fun for all, but still a very exciting time when demolishing the toy building like the pro's. Keep going there is lot's more...
By the way, the AE toy is built super tough to be demolished over and over again for years. Toys are simply not built like this one is, it's tough as nails!
Now the reason the AE Toy is called a toy is because it is so fun, in reality it is a true learning tool. Kid's (and people in general) develop their hand to eye coordination while advancing their skills in building their structures.
Truely a masterpiece when constructed the Advanced Engineering buildings are beautiful structures that
will impress your friends when left standing. You won't want to knock them down.
You can create your own city and really feel like a giant when you walk down your own street!
Above is the Modern Black Glass exterior. AE accessories allow you to change from one style to a different style exterior.
Each kit allows you to cover one entire 4 story square building. If you bought Old Brick but now you want Gothic Stone or Glass?
No problem, we have all three separate Exterior Wall Panel Kits.
Notice the Ground Floor Panels are different then the Upper Floor Panels.
This is so they can look like shops and restaurants that would normally be on the ground level...
These pieces can also be used up higher on the building to create a penthouse look...
The Ground Floor Wall Panels also have right and left angle and center pieces
all specially designed for their position on the building.
Above is a great shot for viewing the detail in the wall panels and to notice the difference between the upper and ground floor wall panels...
AE can grow and grow, as big as you want it to be! AE has been designed to connect whole toys together and make giant L-shape buildings or T-shapes, whatever you can dream up.
Below is a Gothic Stone building that uses two bases connected together to make one long rectangle building. It's up to you what you want to build with Advanced Engineering you can do it!
In the picture above you can also see how the Black Glass
building (on the left) is engineered and built with terraces that step up two floors
to each new terrace and move right around the building as it rises.
This building spirals into the sky and eventually ends at about 9' feet tall! The finished building looks
like a glass flame spiraling into the sky.
Imagine imploding a 9' footer that is bigger then your refrigerator???
Even Dad will get a big kick out of that!
Now for the Best Part! Join in the Real Inventor Contest...
"Become A Real Inventor Contest!"
Endless Ideas To Develop!
ATIC has thought of many ideas to add to the concept. Because we are inventors,
ATIC has decided to let the development of the product line rest in the hands of our customers and
with other inventors.
ATIC Shares the Wealth!
ATIC has decided to share the wealth with our customers
that help us to invent new products for the toy concept.
Each new idea accepted and added to the Advanced Engineering product line will earn the inventors
10% of the profits from the sales of their own idea, for a period of one year!
Classroom Projects!
ATIC wants your ideas! Classroom projects for students are unlimited and could Win Money for the school!
Structure a classroom project where the students together Play with the Concept, Invent a Part for it, Draw and Describe the new idea and Submit the Idea to ATIC for evaluation.
It's that easy. All submitted ideas will receive a personal letter from David Curtis the President of ATIC and inventor of Advanced Engineering. The letter thanks all for their
entry and describes how after inventing an idea and submitting it to ATIC, the students are already Real Inventors!
Anyone Can Try!
The Real Inventor Contest is not just for schools but is for anyone who wants to try!
The drawings do Not have to be of a high quality and the description does not have to be very
good either. ATIC judges the contest by one rule: Who has the Best Idea? But...
A Helpful Hint or Two...
Although ATIC does not judge the ideas by the quality of the drawings
or description of the idea, others are sure to invent similar ideas. In the case of several people separately inventing the same
Winning Idea, The Better your drawings and description are, the better your chances are of winning! ATIC has to be able to determine,
Whohad the Best Idea!
Base your idea on measurements taken from the AE toy set!
A prototype part created (made) and submitted to
ATTIC can also help, but it is not necessary to have one included to win!
